↗Surprise self opening gift box (no ams)
Nice self opening gift box. Perfect to give for birthdays and Christmas. No AMS needed.
Boost MeDesign is not easy, please supportNVIDIA Graphics Card Stand, wide & narrow body & long/short decorative options, suitable for heights 8cm~11cm
Tahmini teslim süresi: 1 gün. Renk seçimini sipariş onayında birlikte netleştiriyoruz.
Bu ürün hakkında soru sorun ↗Boost MeDesign is not easy, please supportNVIDIA Graphics Card Stand, wide & narrow body & long/short decorative options, suitable for heights 8cm~11cm How to use: Tighten the two bolts on the back to secure the stand height. The bolt size is M8*1.5mm. Long bolts are required to install the decorative back panel. The bolts can be tightened with a 5mm hex wrench The two holes on the decorative back panel are 40mm apart with a diameter of 8mm, allowing you to design your own desired extensions or other styles of back panels Strongly recommended to print with AMS, requiring dissimilar support material. The main body requires the same type of material. This model uses a PETG main body with a PLA support interface. Slicing has been optimized for multi-color printing, resulting in less purge waste Long and short decorative options are available. The long decoration is suitable for the narrow body stand, providing two expansion slots Bu ürünün çizimi MakerWorld'den alınmıştır. Yapımcıya teşekkür ederiz. Bu ürün tasarımcının izniyle üretilmektedir.
3D baskının doğal katman izleri ürün yüzeyinde görülebilir. Ekran görüntüleri ile gerçek ürün rengi arasında küçük farklılıklar olabilir.